Download .pdf (78,4 Kb) in English, Russian, German, Spanish

 

In order to obtain the best results when recording digital images using Variable Power Spotting Scope Yukon 100x (with an angular eyepiece) follow the guidelines outlined below:

• Digital cameras with a LCD monitor are ideally suited for taking pictures through the Yukon 100x.
• Make sure the flash of the camera is off (its operation may potentially damage the image quality). Attach the scope to the tripod.
• Set up the scope Yukon 100x and the digital camera according to the instruction manual included with the adapter. The distance between the objective lens of the digital camera and the eyepiece of the scope should not exceed 2-4 mm. It is very important to ensure that the optic axes of the scope and the camera eyepieces coincide.
• After setting up the device the following initial adjustments should be made in the following sequence (at minimum value of magnification): -

          - Screw down the eyepiece of the scope up to the stop and move the objective of the camera towards it;

          - Set up the minimum magnification value on the selected objective lens (it is better to use a 100 mm objective lens);

          - Incrementally move the camera back from the scope eyepiece using the adjusting screw of the Digital Camera Adapter and by rotating the eyepiece obtain the best possible image quality. The gap between the objective lens of the camera and the eyepiece of the scope should be between 1-4mm.

• Depending on the size of the camera sensor, the type of the camera objective and chosen magnification value of the scope the picture area on the screen of the monitor of your digital camera may form a circle. This is a norm. If the adjustments have been carried out correctly, the circle is supposed to be in the centre of the picture and to have a clearly delineated edge. At high magnification values the diameter of the circle increases until a full-frame image is obtained. The image should not have dark or light spots; it should be clear and the illumination of the picture area uniform.
• Particular attention should be paid to ensuring the subject is in sharp focus. The Variable Power Spotting Scope Yukon 6-100x100 has a long-focus objective lens which results in a shallow depth of field and slightly 'soft' edge. This is why all adjustments should be made to ensure that the subject is in sharp focus with the eyepiece of the scope being used to make adjustments  with precision and in an incremental fashion.
• Before taking pictures, try taking sample pictures at different exposures to see which one gives the best results. When taking pictures at high magnification, despite the large diameter of the objective lens of the scope, the light might be insufficient. It is recommended to take pictures at daytime when the illumination is better.
• Press the shutter release button gently, trying to avoid the vibration of the camera and the scope. We recommend you to use a remote control if you have one. If not and you don't need to take a picture at a precise moment in time, the “Timer” or “Self-portrait” setting on your camera will work as well.
• If the weather is windy it is better to place the scope on a tripod in a calm and protected place. Even a light breeze can cause small vibrations of the camera / scope and may spoil the image at high magnifications.

Remember: It is important to be familiar with your digital camera and spotting scope prior to using the device. Make sure you know how to change the necessary settings to achieve the best results.