Download. pdf

---

OPERATING MANUAL

 

The YUKON ATC Video Attachment is designed for long-distance observation and image recording via the Yukon/Sibir 20-50x50, 16-32x50 and Yukon 6-100x100/6-100x100LTS spotting scopes, NVMT, NV 5x60, Exelon 3x50, NVMT Spartan night vision devices.

The YUKON ATC Video Attachment is designed for:

• Night/day observation and video recording.
• Observation and recording of target shooting.
• Other applications that require long-time stationary surveillance and recording of remote objects.

FEATURES

 

• Video attachment can be used either with spotting scopes and night vision devices or independently.
• Ability to record video signals using various recording devices with analog input (videorecorders, camcoders etc.) and to transmit them to external devices (TV sets, monitors etc).
• Fine quality videos. 

Read the present manual carefully before using the YUKON ATC Video Attachment!

 

USE OF THE YUKON ATC VIDEO ATTACHMENT

 

Instructions for independent use of the Video Attachment:

 

• Place the tripod (1) on a stable surface; affix the tripod adapter (3) to tripod with a tripod screw (2) (see picture).
• Secure the video attachment (4) on the front lath of the tripod adapter (3).
• Connect the plug (5) of the spiral cord (6) to the jack of the video attachment (7).
• Insert the red plug (8) of the spiral cord (6) to the jack (9) of the power supply cord (10).
• Insert the yellow plug (11) of the spiral cord (6) into the “AV in” jack (12) of the recording device or external device.
• Insert four AA batteries in the power supply observing polarity. 
• Turn on the power supply unit by sliding the selector to the “on” position (13).
• The power supply unit can then be hung on the tripod.
• The Video Attachment is now ready to record/transmit the signal.

Note: Use tripod adjustments to find the most suitable observation position.   

 

Instructions for the use of the Video Attachment with the Yukon/Sibir 20-50x50, 16-32x50 spotting scopes, NVMT, Exelon 3x50, NV 5x60, NVMT Spartan night vision devices:                       

 

• Place the optical device on the tripod and focus on chosen object of observation.
• Remove the 6-100x100 Eyepiece Adapter (14) - unscrew, clockwise, the video attachment ring (15) and remove the eyepiece adapter. Install the Yukon/Sibir 20-50x50, 16-32x50 Eyepiece Adapter (16) or the NVMT Eyepiece Adapter (17) and screw the ring counterclockwise. 
• Place the video attachment with the eyepiece adapter affixed onto the eyepiece of the optical unit. The triangular mark on the video attachment should be aiming upwards. 
• Connect the plug (5) of the spiral cord (6) to the jack of the video attachment (7).
• Insert the red plug (8) of the spiral cord (6) to the jack (9) of the power supply cord (10).
• Insert the yellow plug (11) of the spiral cord (6) into the “AV in” jack (12) of the recording device or external device.
• Insert in the power supply four AA batteries observing polarity. 
• Turn on the power supply unit by sliding the selector to the “ON” position (13).
• Adjust for the best image quality on the display of the recording device by turning the eyepiece with the affixed video attachment.