|
|
download .pf
|
Instructions Yukon Mobile Player / Recorder | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Attention The electromagnetic fields at the specific frequencies may influence the picture of the recorder. Be sure to read the following before using the recorder Trial recording Before you record one-time events, you may want to make a trial recording to make sure that the recorder is working correctly. Notes on image data compatibility Playback of moving images recorded with your recorder on other equipment and playback of moving images recorded or edited with other equipment on your recorded are not guaranteed. Do not shake or strike the recorder In addition to malfunctions and inability to record moving images, this may render the SD card unusable of image data breakdown, damage or loss may occur. LCD screen Be careful when placing the camera near a window or outdoors. Exposing the LCD screen to direct sunlight for long period may cause malfunctions. Back up recommendation To avoid the potential risk of data loss always copy data to a disk. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Table of Contents
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Getting Started Identifying the parts of the recorder
2 " TFT LCD Screen
Package contents • Yukon Mobile Player/Recorder • AV Cable • AV IN cable • USB cable • Digisight N550 cable • Rechargeable battery • AC Charger • SD card • User Manual
For improvement purposes, design of this product is subject to change. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Getting Started LCD screen indicators
Playback Mode Recording Mode (1) Playback icon
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Getting Started Preparing the power supply
Installing the battery pack Open the cover by slightly pushing and pulling it back. Insert the battery pack with the corner of " " facing toward the battery compartment as illustrated. Close the battery cover. Charging the battery pack Connect the AC adapter with the recorder using the USB cable. The red indicator turns on when charging begins, off when completes. Charging time Battery pack capacity Fully charging time 900 mAh 180 min. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Getting Started Battery life Recording mode Battery pack capacity 900 mAh Continuous recording time 150 min. (fully charged battery) Playback mode Battery pack capacity 900 mAh Continuous playing back 180 min. (fully charged battery) Inserting the SD card
Insert SD card with the "" mark facing the SD slot as illustrated. Recording time of memory capacity
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Motion Detection Recording a. When the main unit power off, connect the mini camera, press and hold the power button[ ] for 3 seconds into a state of preview. b. Press the menu button[-> /M ] into the Setup menu.
c. Shortly Press [] or [], and select "MOTION" d. Select Yes and press[/ ] to start Motion Detektion function. As illustrated
e. Now the recorder is in recording mode, "Press Enter to start Motion Detect" displayed on the screen. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Cycle Video (Overwrite automatically when storage is full) a. Press and hold the power button for 3 seconds into a state of preview.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Recording with the digital night vision monoculars Ranger 5x42 and Ranger Pro 5x42 a. Connect the plug of the Ranger's AV cable to the Ranger's "AV out" port (see connection scheme below). b. Connect the yellow plug of the recorder's AV cable to the yellow jack of the Ranger's AV cable. c. Connect the min plug of the recorder's AV cable to the "AV in" port of the recorder. d. Start the recorder, turn on the NV Ranger 5x42 (or Ranger Pro 5x42). e. Adjust the image according to the instructions before recording.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Recording moving images from TV set
Start recording a. Slide [ R/P ] key toward the position of [ R ] and connect the recorder as illustrated. b. Connect the recorder with TV set or other devices by AV-in cable. Yellow: video Red: Left channel audio White: Right channel audio Playback moving images
а. Slide [ R/P ] key toward the position of [P] b. Turn on the recorder. c. Select the desired moving image with the [] or [ key. d. Press [ /►|| ] key to play back the selected moving image. e. Press [/►||] key to stop playing. f. Press [-> / M] key to return to the recorded file list. Playback moving images on personal computer
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
a. Turn on PC. b. Insert SD card into the recorder and switch it on. c. Connect DVR with PC; d. Double click the removable disk in "My computer", the recorded videos are in the list; e. Select and double click the video to playback. Image file storage destinations and image files For Windows XP users (the drive recognizing the recorder is "D") Desktop My computer Windows XP (C:) NO_NAME ( D:) DCIM 100MOVIE -MPEG0001.AVI MPEG0002.AVI MPEG0003.AVI MPEG0004.AVI Image files recorded with your recorder are listed in folder of "l00Video". The meaning of the file names are as follows. 0000 stands for any number within the range from 0001 to 9999. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Playback moving images on TV screen
a. Connect the AV connecting cable to the AV output jack of your recorder and to the AV input jack of the TV. b. Turn on the TV, then start playback on your recorder (refer to Setting display). The recorded files appear on the TV screen. Delete recorded file a. Slide [R/P ] key toward the position of [ P], turn on your recorder, and then by long press [->/ M] key until "Delete" appear on the screen showed as below: DELETE YES NO b. Select " YES " to delete the current file or select " NO " to cancel the operation | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sSetting the language Setting the language a. In the state of preview, press the [->/ M] button to enter "Setup" b. Press [ >>|] or [|<< ] to select "Language", and press [/►||] to enter "Setup"
c. Select the required language and press [/►||] Setting the storage a. In the state of preview, press the [->/ M] button to enter "Setup" b. Press [] or [ to select "STORAGE", and press [/►||] to enter setup
c. Select "FLASH" or "SD CARD" and press [/►||] (as illustrated) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Setting Operations Setting the pixels a. In the state of preview, press the [->/ M] button to enter "Setup" b. Press[] or [ to select "PIXELS", and press [->/►||] to enter setup
c. Select"720x576 " '720x480" "640x480" and press [->/►||] (as illustrated) Setting the motion detection a.In the state of preview, press the [с/м] button to enter "Setup" b.Press [] or [] to select "MOTION", and press [->/►||] to enter setup
c.Select YES " or "NO" and press (as illustrated) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
setting Oper Setting the cycle recording a.In the state of preview, press the [->/ M] button to enter "Setup" b.Press [] or [] to select "CYCLE", and press [->/►||] to enter "Setup"
c.Select YES " or "NO" and press [->/►||] (as illustrated) Setting the display a. In the state of preview, press the [с/м] button to enter "Setup"
b. Press [] or [] to select "DISPLAY", and press[->/►||]to enter setup
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Setting the date and time a. In the state of preview, press the [->/ M] button to enter "Setup" b. Press [] or [] to select "DATE TIME", and press [->/►||]to enter setup
c. select "Date Format", and press [->/►||] to enter setup (as illustrated) d. select Y/M/D" or "D/M/Y" and press [->/►||] (as illustrated)
e. select" Date Stamp " and press [->/►||] to enter setup (as illustrated) f. Select YES " or "NO" and press[->/►||] (as illustrated)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
g. select" Time Setting "and press[->/►||]to enter setup (as illustrated!) h. Press [] or [] to adjust, press [->/►||] to enter (as illustrated)
Setting the LCD off a. In the state of preview, press the [->/►||] button to enter "Setup" b. Press [] or [] to select "LCD OFF", and press [->/►||] to enter setup c. Select "l MINUTE" or "5 MINUTES" or "NEVER" and press [->/►||] (as illustrated) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Setting Operations Setting the power off (Available under no operation) a. In the state of preview, press the [->/ M] button to enter "Setup" b. Press[] or [] to select "POWER OFF", and press [->/►||] to enter setup
c. Select "l MINUTE" "5 MINUTES" or "NEVER" and press [->/►||] (as illustrated) Setting the video time a. in the state of preview, press the [->/ M] button to enter "Setup" b. Press[] or [] to select "VIDEO TIME", and press [->/►||] to enter setup
c. Select"10 MINUTES" "30 MINUTES" or "60 MINUTES" and press [->/►||] (as illustrated ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Setting the format a. In the state of preview, press the [->/ M] button to enter "Setup" b. Press [] or [] to select "FORMAT", and press [->/►||] to enter setup
c. Select "FLASH" or "SD CARD" and press [->/►||] (as illustrated )
Attention: Format will delete all the data and non-recoverable. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Specifications
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Warranty The Manufacturer warrants its products against defects in materials and workmanship for a period of three years from the moment of purchase or from the manufacturing date if there is no receipt to prove purchase. To avoid any problems, we recommend becoming familiar with the device's user manual. The warranty does not cover any external damage to the device, its casing or adjustable parts' movements (i.e. smooth movement or rough movement). The manufacturer has the right to render the warranty null and void in the following cases: • if thedevicehasbeenmodifiedortamperedwith, • if the device has been dropped or has marks of mechanical or chemical damage, • if the device has been tampered with by unauthorized repair, • if the device has been damaged as a result of fire or natural disasters, • if the device has been damaged as a result of liquids or other substances getting inside. En the event of activating the warranty repair service, please contact the distributor where the device was purchased or contact the national distributor in your country. Any product returned under this warranty should be packaged in a sturdy, outsideshipping carton, to prevent damage in transit. En addition, it must be accompanied with the following items: • letter explaining the unit's problem. • Copy of the original receipt showing when and where the product was purchased. • Return Shipping Information, including return address and contact person. Please contact our service centre with any questions you might have at e-mail: |
.jpg)
